Underfloor Heating

Underfloor Heating

Add a touch of luxury to your home by fitting underfloor heating - perfect for taking the chill off cold tiled floors. Ideal for kitchens, bathrooms, en suites or conservatories, under-tile heating provides radiant heat across the entire floor area, providing a feeling of warmth and comfort throughout the room.

Underfloor Heating  Please select a subcategory below

Subcategories

  • Heatmat 110W Underfloor Heating Mats
    Heatmat's 110W/m² electric underfloor heating mats are ideal for very well insulated properties or developments with a lower power requirement. 110W mats are often used in energy-efficient new builds, Passivhaus properties or eco homes where a low output system will easily...

    Heatmat's 110W/m² electric underfloor heating mats are ideal for very well insulated properties or developments with a lower power requirement.

    110W mats are often used in energy-efficient new builds, Passivhaus properties or eco homes where a low output system will easily heat rooms. 110W mats can be used as sole source heating or support other forms of heating in a property.

    110W heating mats are economical to run over larger areas due to their lower power consumption. And a lower output system reduces the likelihood of problems caused by thermal blocks.

    Combining multiple units
    110W heating mats are designed to be laid together with other 110W mats to ensure the perfect fit every time. The mats are wired into the thermostat or junction box in parallel, but it is important to ensure that any other mats used in the same room are also rated at 110W/sqm.

    Simple and speedy installation
    Heat Mat electric underfloor heating mats are incredibly simple to install, and in large areas can take one third of the time a loose heating cable would take to fit. The mats can be cut and turned to ensure that they fit the room perfectly, and for particularly complicated areas the cable can be stripped from the mat and laid as a loose cable. The mats readily affix to the floor with four strips of double-sided tape, and the strong fibreglass mesh above the cable ensures it is protected during tiling.

    View Range
  • Heatmat 160W Underfloor Heating Mats
    Heatmat's popular 160W/m electric underfloor heating mats are high-quality, trusted by installers and homeowners nationwide and easy to fit. A professional fast-to-fit system designed to provide energy-efficient floor warming in all rooms, and a full heating system in well...

    Heatmat's popular 160W/m electric underfloor heating mats are high-quality, trusted by installers and homeowners nationwide and easy to fit.

    A professional fast-to-fit system designed to provide energy-efficient floor warming in all rooms, and a full heating system in well insulated areas.

    This award winning electric underfloor heating mat range can be used beneath virtually any type of floor covering ensuring luxurious warm floors whatever your chosen floor finish. Our technologically advanced wire design delivers minimal build height combined with a robust high-powered heating cable.

    Simple and speedy installation
    Heat Mat electric underfloor heating mats are incredibly simple to install, and in large areas can take one third of the time a loose heating cable would take to fit. The mats can be cut and turned to ensure that they fit the room perfectly, and for particularly complicated areas the cable can be stripped from the mat and laid as a loose cable. The mats readily affix to the floor with four strips of double-sided tape, and the strong fibreglass mesh above the cable ensures it is protected during tiling.

    Suitable for nearly any floor covering
    If you are unsure of the final floor covering, 160W mats can be fitted and then covered by a flexible levelling compound allowing a huge range of final floor coverings to be fitted on top including tiles, carpet, wood and vinyl. 

    Energy efficient solution
    160W heating mats are extremely efficient at converting electricity into heat. They can be powered from renewable energy sources. The NGTouch thermostat has energy saving features and displays usage in £'s and pence helping to ensure your system runs efficiently. 

    View Range
  • Heatmat 200W Underfloor Heating Mats
    Heatmat's 200W heating mats are easy-to-install and designed to provide energy-efficient tile warming, or a full heating system, in all types of room. This award winning underfloor heating mat range reacts significantly faster than less powerful systems, and the ultra-thin...

    Heatmat's 200W heating mats are easy-to-install and designed to provide energy-efficient tile warming, or a full heating system, in all types of room. This award winning underfloor heating mat range reacts significantly faster than less powerful systems, and the ultra-thin cable on mesh construction ensures floor levels are only raised by a few millimetres.

    200W mats are designed for use under tile or stone and cannot be laid directly onto wood or other floor coverings unless the floor base is skimmed with 2-3mm of flexible tile adhesive/levelling compound or are laid first.

    200W heating mats are remarkably simple to operate using a Heat Mat or electric underfloor heating thermostat and provide luxurious warm tile, or natural stone, floors.

    Sub-floor surfaces and insulation board
    For the most energy efficient system and the fastest warm up time we recommend laying 200W heating mats onto Heat Mat thermal insulation board. Mats can also be laid onto pre-primed concrete, tile or stone surfaces or suitably secured ply board skimmed with 2mm of tile adhesive.

    Bespoke heating mats
    Bespoke units can be manufactured to order for hotel or Pod projects, with alternative coverage’s, widths, Wattage outputs and cable thicknesses available.

    Energy efficient solution
    200W heating mats are almost 100% efficient at converting electricity into heat and they can easily be powered by locally generated electricity from either photo voltaic or wind power sources. When used with Heat Mat’s NGTouch thermostat they form a Part L compliant system, and they are also suitable for integration into a home/building automation system. The NGTouch thermostat has energy saving features and displays usage in £'s and pence helping to ensure your system runs efficiently. 

    View Range
  • Heatmat Combymat Underfloor Heating Mats
    An earth shielded system designed to be used beneath quality floating laminate and engineered board floors without the requirement for covering with levelling compounds. With the addition of Overlay Boards this versatile system can be also be used beneath carpet, vinyl,...

    An earth shielded system designed to be used beneath quality floating laminate and engineered board floors without the requirement for covering with levelling compounds. With the addition of Overlay Boards this versatile system can be also be used beneath carpet, vinyl, linoleum and bonded board floor coverings, without requiring any wet trade. The mats can provide sole source heating in reasonably well insulated rooms, and floor warming in other situations.

    The mats are quick to install and can be 'cut-andturned' like a conventional undertile heating mat. When used with Heat Mat's intelligent thermostats they provide a fast reacting and cost-effective heating system.

    View Range
  • Heatmat Wall Heating Mats
    The use of wall heating systems is increasing and Heat Mat's wall heating mats have been specified and installed at numerous projects over the last decade. In some circumstances the use of heated towel rails is not desirable and heating the wall behind the rail is a very...

    The use of wall heating systems is increasing and Heat Mat's wall heating mats have been specified and installed at numerous projects over the last decade.

    In some circumstances the use of heated towel rails is not desirable and heating the wall behind the rail is a very efficient alternative. This is an increasingly popular application in new build hotels and apartment buildings along with a suite of other applications such as:
    • Keeping tiled walls warm where people will be sitting against them
    • To enable fast drying of walls in wet rooms and showers
    • Providing additional ambient heating to rooms where other heat sources are not practical

    View Range
  • Heatmat Pro Range Underlaminate System
    A UK manufactured fully earthed system designed to be used beneath quality floating laminate and engineered floor boards without the requirement for covering with levelling compounds. The mats can provide sole source heating in well-insulated rooms, and floor warming in less...

    A UK manufactured fully earthed system designed to be used beneath quality floating laminate and engineered floor boards without the requirement for covering with levelling compounds. The mats can provide sole source heating in well-insulated rooms, and floor warming in less well-insulated situations. The mats are quick to install and can be 'cut and turned' like a conventional undertile heating mat. When used with a Heat Mat thermostat they provide a fast reacting and economic to use heating system.

    View Range
  • Heatmat 3mm Heating Cable
    Flexible, ultra-thin 3mm underfloor heating cableA flexible simple to fit heating system designed to provide energy efficient floor warming or a full heating system as desired. This electric underfloor heating cable is particularly suited to small or complicated areas where...

    Flexible, ultra-thin 3mm underfloor heating cable
    A flexible simple to fit heating system designed to provide energy efficient floor warming or a full heating system as desired. This electric underfloor heating cable is particularly suited to small or complicated areas where heating mats can be more complicated to install.

    The systems output is varied by altering the spacing of the heating cable, allowing 200W/m² to be installed in conservatories and similar high heat loss areas. An additional benefit of this system is that it can be used beneath virtually any floor covering if covered with a levelling compound and installed with an output of no more than 160W/m².

    Selecting the correct heating cables
    To start with you will need to decide on the heat output of your heating system. For floor warming or room heating in well insulated areas we suggest installing the cable at roughly 150W/m2, and for high heat loss areas, or for a faster reacting system, we recommend choosing a 200W/m2 output.

    Once you have chosen your desired output you should measure your room to find the total floor area. You should then subtract from this figure any areas where kitchen or bathroom furniture will be placed, or where furniture without an air gap underneath it will be positioned. Once you have subtracted these areas you have your free floor area (FFA). If you multiply the FFA by the Wattage output you have chosen you will have the total output of heating cable you require, and you should then choose the most suitable combination of heating cables from the front of this sheet to provide you with the closest combined Wattage to your required output.

    View Range
  • Heatmat FlexHeat Cable
    A flexible simple to fit heating system designed to provide energy-efficient floor warming or a full heating system as desired. This electric underfloor heating cable is particularly suited to small or intricate areas where heating mats can be more complicated to install. The...

    A flexible simple to fit heating system designed to provide energy-efficient floor warming or a full heating system as desired. This electric underfloor heating cable is particularly suited to small or intricate areas where heating mats can be more complicated to install.

    The system's output is varied by altering the spacing of the heating cable, allowing 200W/m²  to be installed in conservatories and similar high heat loss areas. An additional benefit of this system is that it can be used beneath virtually any floor covering if covered with a levelling compound and installed with an output of no more than 160W/m².

    • When installed at 200W/m² this system is suitable for providing a full room heating system, even in high heat loss areas such as conservatories
    • Perfect for floor warming or room heating in standard rooms when installed at 160W/m²
    • Alter the heat output to match your individual requirements - outputs from 80W/m² to 230W/m²  are possible
    • The compact FlexHeat range is designed for installers to be able to keep a small range of sizes in stock which can be mixed and matched to provide coverage for nearly any room
    • When used with Heat Mat's intelligent thermostat timers this heating cable provides a more energy-efficient and cost effective heating system than lower powered alternatives
    • Great value for money - can be installed onto thermal insulation boards to provide a faster reacting and more economic heating system
    • Significantly quicker to install than some alternative systems as there is no need to cover the entire heating cable with tape due to its high strength outer insulation

    FlexHeat Cable converts electricity into heat with almost 100% efficiency, so the running costs of a system depend largely on the room’s insulation and the target temperature.

    The better insulated a room is, the less expensive it will be to operate the underfloor heating system, with the largest benefit being obtained in installing thermal insulation boards directly beneath the cable.

    When installing FlexHeat Cable at an output of 150W/sqm onto a well-insulated floor, we would expect the underfloor heating system to operate on average for less than 40% of the time to provide a total heating system. With electricity costs of 10 pence per kilowatt hour this would lead to running costs of around 0.6 pence per hour when the heating system is running.

    View Range
  • Heatmat 6mm In-Screed Dual Conductor Heating Cable
    A robust and cost effective In-screed heating cable designed for new build and major renovation projects where a 65mm screed will be laid. The cable is suitable for providing energy-efficient room heating and floor warming beneath nearly any floor covering and is fast to...

    A robust and cost effective In-screed heating cable designed for new build and major renovation projects where a 65mm screed will be laid. The cable is suitable for providing energy-efficient room heating and floor warming beneath nearly any floor covering and is fast to install and adds no build height to the construction.

    In-screed heating cables provide a remarkably stable room temperature, and the screed bed can be 'charged up' over night to take advantage of cheap rate electricity, before releasing its heat into the room during the day.

    • Perfect for any situation where a new screed floor is going to be laid
    • Particularly suitable for large areas such as warehouses or sports halls; the installation time per sqm drops dramatically in rooms over 100m²
    • Benefits from being installed directly onto foil or concrete faced sub-screed insulation
    • Simple and cost effective to install, providing Heat Mat's least expensive electric underfloor heating system
    • When used with one of Heat Mat's intelligent thermostat timers provides an exceptionally energy-efficient heating system
    • 3-Phase systems and bespoke sizes of cable available if required

    View Range
  • Heatmat Low Profile Thermal Insulation Boards
    Increase energy-efficiency with Underfloor Heating Insulation Boards. Heatmat's thermal insulation board is ideal for insulating your floor and boosting the warm up time and efficiency of your underfloor heating system. The product is suitable for use beneath any of our...

    Increase energy-efficiency with Underfloor Heating Insulation Boards.

    Heatmat's thermal insulation board is ideal for insulating your floor and boosting the warm up time and efficiency of your underfloor heating system. The product is suitable for use beneath any of our underfloor heating systems and the boards can pay for themselves, through reduced heating bills, in as little as 3 years when used on un-insulated bases.

    Underfloor heating insulation boards minimise downward heat loss. When 10mm boards are used beneath a 200W system the floor will normally heat up in as little as 20 minutes and they add very little build height for a great energy saving measure.

    View Range
  • Heatmat NGTouch Touchscreen Thermostats
    The NGTouch is an easy-to-use touchscreen thermostat with a range of functions designed to make controlling your underfloor heating easy. You can programme the NGTouch to suit your daily schedule. The simple touchscreen interface allows you to select various modes depending on...

    The NGTouch is an easy-to-use touchscreen thermostat with a range of functions designed to make controlling your underfloor heating easy.

    You can programme the NGTouch to suit your daily schedule.
    The simple touchscreen interface allows you to select various modes depending on your lifestyle including holiday mode, boost for an hour of full-power warmth or eco mode.

    • Choose 4 or 6 events per day to suit your lifestyle
    • Includes comfort mode, holiday mode, boost, eco and frost protection
    • See your energy use over a week, a month or a year
    • Monitor your energy use in kW and £'s
    • Switch the thermostat to manual for the simplest control 
    • Download diagnostic data using your smart phone for technical support

    View Range
  • Heatmat NGT Programmable Thermostats
    Heat Mat's NGT thermostat is a simple to use electric underfloor heating thermostat perfect for controlling any of Heat Mat's underfloor heating systems. Once installed and setup it automatically controls both room and floor temperature and also learns the heat characteristics...

    Heat Mat's NGT thermostat is a simple to use electric underfloor heating thermostat perfect for controlling any of Heat Mat's underfloor heating systems. Once installed and setup it automatically controls both room and floor temperature and also learns the heat characteristics of your room.

    • Available in more than 60 finishes including genuine metal and glass options. See our website for full details
    • Easy to read pure white ultra-large dot matrix display
    • Displays energy usage in pounds and pence
    • Choose from four or six independent programmable events each day
    • Can become a manual on/off thermostat if desired
    • Controls up to 16 Amp/3,600W of underfloor heating directly without the need for a contactor
    • Central control version available to operate a maximum of 15 rooms

    View Range
  • Heatmat neoStat-e Wireless Thermostats
    The neoStat-e is a smart and stylish touch button thermostat, available from Heat Mat, with or without a neoHub for wireless connectivity. The wireless neoStat-e can be controlled by an app and requires the neoHub. Up to 32 rooms can be managed from a smartphone or tablet....

    The neoStat-e is a smart and stylish touch button thermostat, available from Heat Mat, with or without a neoHub for wireless connectivity.

    The wireless neoStat-e can be controlled by an app and requires the neoHub. Up to 32 rooms can be managed from a smartphone or tablet.

    Control your heating with your phone.
    Using the location services feature on your iPhone or Android smart phone, Neo can help you reduce your energy consumption by turning the heating off when you're out.

    Why choose the neoStat? 
    • Simple to use
    • Stylish interface
    • Wireless technology
    • Energy saving
    • Complete control from anywhere
    • Use as a thermostat timer or manual timer
    • Available in black, white or silver

    View Range
  • Heatmat Central Control Thermostats
    The Central Control consists of a central controller with built-in thermostat. The central controller can communicate wirelessly with up to 15 Room Thermostats or Slave Controllers. The system ensures maximum comfort with minimum energy consumption. The central controller...

    The Central Control consists of a central controller with built-in thermostat. The central controller can communicate wirelessly with up to 15 Room Thermostats or Slave Controllers. The system ensures maximum comfort with minimum energy consumption.

    The central controller communicates wirelessly with other units in the system and has an open-field range of 100 metres, which is adequate for most houses. Activating a repeater function in the thermostats can extend the range.

     The central controller features an easy-to-read graphical display with backlighting. Thanks to its logical menus with clear symbols and text the unit is extremely easy to operate. 

    The central controller has its own built-in 16A thermostat, making the system very cost effective.

    View Range
  • Heatmat TPS Manual Thermostats
    Heat Mat’s TPS thermostat is a simple to use electric underfloor heating thermostat, perfect for controlling any of Heat Mat’s electric underfloor heating systems. The ivory TPS features straightforward temperature buttons concealed behind a door, a digital display showing the...

    Heat Mat’s TPS thermostat is a simple to use electric underfloor heating thermostat, perfect for controlling any of Heat Mat’s electric underfloor heating systems. The ivory TPS features straightforward temperature buttons concealed behind a door, a digital display showing the current temperature reading and a clear manual on/ off button.

    The temperature is easily adjusted and increased using the red arrow or decreased using the blue arrow while an LED light indicates when the heating is active.

    The TPS thermostat monitors ambient room and floor temperatures, and you can choose which of these is your target temperature. When you choose the ambient temperature the floor sensor still ensures the floor doesn't overheat.

    This simple thermostat is ideal for use when a programmable timer thermostat is not required; for instance in rooms that are used on an ad-hoc basis.

    View Range